cold drawn tubes
"
G Type Fin Tube ASTM Standard Finned Aluminum Tubing with High Thermal Efficiency and Customizable Design for Heat Exchangers
G Type Fin Tube SA179 Stainless Steel Finned Aluminum Tubing For Heat Exchanger 【Material】 The G Type Fin Tube consists of a carbon steel base tube (SA179) and aluminum fins that are mechanically embedded into the outer surface of the tube in a G-shaped groove. This design ensures excellent thermal contact between the fin and the tube, enhancing heat transfer efficiency while maintaining mechanical stability. 【Specifications】 Base Tube Material: ASTM A179 Seamless Carbon
G Type Finned Tubes Embedded Fin Tube Stainless Steel Pipe with 1mm-40mm Thickness 6-630mm Outer Diameter 6-12m Length
G Type Finned Tubes — Embedded Fin Tube on Stainless Steel Pipe for Heat Exchangers Material G-type (embedded) finned tubes are stainless-steel base tubes with a helical groove machined on the outer wall. An aluminum, copper, carbon steel, or stainless steel fin strip is wound into the groove under tension, and the displaced base-metal is rolled back to mechanically lock the fin—forming a tight, gap-free metal-to-metal interface ideal for high vibration and cyclic thermal
Pipa Bersirip Spiral untuk Penukar Panas Industri dengan Efisiensi Transfer Panas Tinggi dan Ikatan Sirip yang Kuat
Spiral Finned Tube Welded Helical Serrated Finned Tubes For Industrial Heat Exchangers Material The Spiral Finned Tube, also known as a Welded Helical Serrated Finned Tube, is a type of enhanced heat transfer component made by welding helical fins to the surface of a base tube. The base tube is typically manufactured from carbon steel, stainless steel, or alloy steel, while the fins are usually made from the same or compatible materials. The fins are helically wound and
Diminyaki Tabung Baja Baja Karbon / Baja Mangan Karbon Astm A178
ASTM A178 Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Steel Tube Application:boiler tubes,boiler flues,superheater flues and e ends. Size:L--4~12m OD--12.7-127mm WT--0.9-9.1mm Grade:Type A,C and D Manufacture :electric-resistance welding. Heat Treatment:After welding,all tubes shall be heat treated at a temperature of 1650°F[900℃]or higher and followed by cooling in air or in the cooling chamber of a controlled-atmosphere
Erw Carbon Steel Heat Exchanger Tabung Pipa Kondensor Astm A214 Sa214
ASTM A214 SA214 ERW Carbon Steel Heat-Exchanger Tubes Condenser Pipes Size range: O.D.:6-76.mm W.T.:0.9-19.0mm L: according to customer requirement Manufacture: Tubes are made by electric-resistance welding. Steel Grade and Chemical Compositions: C 0.18 Mn 0.27 to 0.63 P ≤0.035 S ≤0.035 Hardness Requirements: The tubes shall have a hardness number not exceeding 72HRB. Surface Condition: The finished tubes are free of scale., slight amount of oxidation is not considered as
ASTM A178 Tabung Penukar Panas Baja Karbon Dilas Bulat
ASTM A178 Round Welded Carbon Steel Heat Exchanger Tubes Material: Carbon steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirement Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and e ends Heat treatment: After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or higher and followed by cooling in air or
ERW Dilas Pipa Baja Karbon / Tabung Baja Paduan Bentuk Bulat Seng
TORICH SAEJ526 PVF/Copper Coating Single Wall Bundy Tube For Brake system 1. Standard SAEJ526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems ASTM A254 Copper-brazed steel tubing 2. Steel Grade BHG1,SPCC,SPCD, SPCEN, ST14, ST15, ST16,DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per
ASTM A254 Copper Brazed Bundy Tube Single Wall Welded Tube
ASTM A254 Copper Brazed Bundy Tube Single Wall Welded Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s
Bundel Pelapis Tembaga 4.76 * 0.7 Tabung Baja Dilas
4.76*0.7 Welded Steel Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s request 5. Production Process
