cold formed steel tube
"
ASTM A714 Gr.1 High-Strength Low-Alloy Seamless Steel Pipe Untuk Teknik Konstruksi
ASTM A714 Gr.1 Gr.2 Gr.3 Gr.4 Alloy Steel Pipe: High-Strength Low-Alloy Seamless Steel Pipe for Construction Engineering Introduction ASTM A714 is a specification that covers high-strength low-alloy seamless steel pipes intended for use in construction engineering. These pipes are designed to provide excellent mechanical properties and corrosion resistance, making them suitable for various applications in structural and industrial settings. Material The ASTM A714 specificatio
G Type Finned Tubes Embedded Fin Tube Stainless Steel Pipe with 1mm-40mm Thickness 6-630mm Outer Diameter 6-12m Length
G Type Finned Tubes — Embedded Fin Tube on Stainless Steel Pipe for Heat Exchangers Material G-type (embedded) finned tubes are stainless-steel base tubes with a helical groove machined on the outer wall. An aluminum, copper, carbon steel, or stainless steel fin strip is wound into the groove under tension, and the displaced base-metal is rolled back to mechanically lock the fin—forming a tight, gap-free metal-to-metal interface ideal for high vibration and cyclic thermal
Pipa Baja Persegi Khusus Pipa Baja Berongga Baja Karbon Mulus
TORICH Square Hollow Section Seamless Carbon Rectangle Square Steel Tube Standard: ASTM A500 Seamless Steel Rectangle Tubing Cold-Formed Welded Carbon Structural Tubing in Rounds and Shapes Rectagnle and Square steel square tube onesteel Applications: for construction of bridges, and buildings, and for general strcutrual purposes, For Algricultrual Michinery, Engineering etc. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20
Paduan nikel khusus incoloy 600601 UNS N06600 tabung paduan tabung kapiler
Special nickel alloy incoloy 600 601 UNS N06600 tube alloy capillar tube Applications: For fluid and gas transport Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Inconel 601 Size range: O.D. 3.18-101.6mm W.T. 0.5-20mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Form ASTM Rod, bar and wire B 166 Plate, sheet and strip
Koefisien Perpindahan Panas Tinggi Extruded Od10mm Heat Exchanger Tubes
High Heat Transfer Coefficient Extruded Finned Tube And Fin Radiator Heat Exchanger Tubes The finned tube adopts the form of base tube covering aluminum tube, (the base tube can be carbon steel, stainless steel, copper) through machine extrusion to form the fin, the base of the fin is close to the outer wall of the tube, with high heat transfer coefficient and excellent heat transfer performance. Details: Maximum Working Temperature 545 Fin Materials Aluminium Base Tube
Baja Karbon Tipe Kl Wt 10mm Extruded Fin Tube
Extruded finned tube Fin Tube Strip Air Heater Gilled Tube Radiator Gilled Tube Fin Tube Divaice Fin Tube Connector Puller The finned tube adopts the form of base tube covering aluminum tube, (the base tube can be carbon steel, stainless steel, copper) through machine extrusion to form the fin, the base of the fin is close to the outer wall of the tube, with high heat transfer coefficient and excellent heat transfer performance. Maximum Working Temperature : 545 Fin Materials
Astm A513 1020 Presisi Dom Square Tubing Dilas
ASTM A513 1020 DOM Tubing Square Tubing Sizes 0.188” to 12.000” O.D. with 0.028” to 0.625” W.T. Length Stocked in 17.000’ - 24.000’ random lengths (cut to length available) Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths Added Service Draw & Expansion as per required Size & Length Heat Treatment, Bending, Annealed, Machining Etc. End Connections Plain, Screwed, Bevel, Threaded Type Seamless / Welded / ERW / Fabricated / CDW ASTM A513/ ASME SA513
ASTM A213 Pipa Baja Paduan Feritik dan Austentik Stainless Untuk Boiler dan Penukar Panas
ASTM A213 Stainless Ferritic and Austentic Alloy Steel Pipes For Boilers and Heat-Exchangers Applications: For boilers, super heaters and heat-exchangers Technique: Cold-Formed Size range: O.D. 6-168mm W.T. 1-15mm Length max 12000mm Heat Treatment: Steel Grade: Heat Treat Type Austenitizing/ Soluctioning Temperature, min or rang Cooling Media TP201 UNS20100 Solution treatment 1040℃ Water or other rapid cool TP202 UNS20200 Solution treatment 1040℃ Water or other rapid cool
Rekayasa Pipa Baja Khusus Carbon Steel Tubing Rectangular Dengan GB / T 19001-2008
Special Steel Pipe , Steel Rectangle Tubing for Construction application Standard: ASTM A500 Steel Rectangle Tubing Cold-Formed Welded Carbon Structural Tubing in Rounds and Shapes Rectagnle and Square Applications: for construction of bridges, and buildings, and for general strcutrual purposes For Algricultrual Michinery, Engineering etc. Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L
